ASTM/ ASME A106/SA106 Seamless Carbon Pipe

ASTM/ ASME A106/SA106 Seamless Carbon Steel Pipe Setšoantšo se hlahang

Tlhaloso e Khutšoanyane:

ASTM/ASME A106/SA106 liphaephe tsa tšepe tse seamless li sebelisoa lits'ebetsong tsa indasteri tse kenyelletsang mocheso o phahameng, ho kenyeletsoa liphaephe tsa ts'ebetso, lisebelisoa tse belisang, liteishene tsa khatello, le libaka tsa ho hloekisa oli.Silicon e eketsehileng e ntlafatsa ts'ebetso ea sehlahisoa maemong a mocheso o phahameng, joalo ka liphaephe tsa mouoane le ts'ebetso ea ts'ebetso.ASTM/ASME/SA106 Piping (hape e kenyelelitsoe ho ASME Code SA/A106) ke litekanyetso tse tloaelehileng bakeng sa liphaephe tsa tšepe tse seamless tsa carbon maemong a mocheso o phahameng.Hangata e sebelisoa libakeng tsa ho hloekisa le lifekthering ha likhase kapa maro a tsamaisoa ka mocheso o phahameng le khatello.

Re romelle lengolo-tsoibila

Lintlha tsa Sehlahisoa

Li-tag tsa Sehlahisoa

Haihui Steel ke moetapele oa lefats'e oa phepelo ea phala ea A106/SA106, e bolokang mela e felletseng ea liphaephe tsa Kereiti ea B/C ka boholo ho tloha ho NPS 1/2″ ho ea ho NPS 36″ ka botenya ba mabota (karolelano) joalo ka ha ho boletsoe ho ANSI B36. .10 Pontšo.Mefuta e meng ea liphaephe e ka fanoa haeba pipe e kopana le litlhoko tse ling tsa tlhaloso ena.

Pipe e laetsoeng ho ea ka tlhaloso ena e tla ba e loketseng bakeng sa ho kobeha, ho phunya, ho tjheseletsa le ts'ebetso e tšoanang ea ho etsa.Palo e felletseng ea SA/A106 e fumaneha ho Annexes 10 ho isa ho 160, STD, XS, XXS.

Boholo(mm):

OD( Out Diameter)	WT (Botenya ba Lebota)	L(Bolelele)
6.0-323	1.0-30.0	boholo ba 12000

Dimension Tolerances

Mofuta oa Pipe	Boholo ba Pipe	Mamello
	OD≤48.3mm	± 0.40mm
Mohatsela o Mong	OD≥60.3mm	±1%mm
	WT	±12.5%

Sebopeho sa Lik'hemik'hale

Kereiti ea tšepe	C≤	Mn	P≤	S≤	Si≥	Cr≤	Ho ≤	Mo≤	Ke≤	V≤
A	0.25	0.27-0.93	0.035	0.035	0.10	0.40	0.40	0.15	0.40	0.08
B	0.30	0.29-1.06	0.035	0.035	0.10	0.40	0.40	0.15	0.40	0.08
C	0.35	0.29-1.06	0.035	0.035	0.10	0.40	0.40	0.15	0.40	0.08

Thepa ea Mechini

Kereiti ea tšepe	Tensile Strength(Mpa)	Yield Strength(Mpa)	Elongation(%)	Boemo ba Phano
A	≥330	≥205	20	Annealed
B	≥415	≥240	20	Annealed
C	≥485	≥275	20	Annealed

Litlhoko tsa tlhahlobo bakeng sa liphaephe tsa tšepe tsa A106 tse se nang moeli

Teko ea Hydrostatic: Hlahloba hore na khatello ea teko e hlahisa khatello ea maikutlo leboteng la phala e lekanang le 60% ea matla a fokolang a tlhahiso ea lihlahisoa (SMYS) mocheso oa kamore.Khatello e phahameng ha ea lokela ho feta 2500 psi bakeng sa NPS 3 le tlase le 2800 psi bakeng sa boholo bo boholo.Khatello e bolokiloe ka metsotsoana e seng ka tlase ho 5.